How to change dashboard (Xiaomi)
Difficulty rating: 1/10
Warning: When performing any hardware modifications or replacements, you do so at your own risk. This guide is for informational purposes only, and I do not assume any responsibility for any damage or injury caused by following these instructions. Always exercise caution and take the necessary safety precautions.
1) Heat up your dashboard cover.
You can also use a hair dryer for this.
Please make sure not to heat too much or or you might melt the plastic, resulting in you having to buy a new cover or having a naked display.
2) Remove dashboard cover
3) Using the Philips screwdriver, unscrew the screws
4) Remove the dashboard
Rise up the dashboard. Don't pull too hard.
The cables connected to the dashboard are very fragile, don't pull too hard or you risk breaking them.
4.1) Remove the cable holder
Skip this step if you don't see any cilidrical shaped gray thingy
Cut the ziptie, making sure not to cut the actual thing and remove it from the cables.
You should now be left with something like this
Carefully disconnect all the cables and replace/reinstall/whatever your xiaomi's dashboard.
Last updated
Was this helpful?